DANTEST HARDWARE

Dantest uses specialized hardware. It is an electronic device, which transforms the ECG signal into an analogue curve on your PC. You have a choice among several different types of hardware.

DT-HW1  (double-channel) – registers and records from ECG and plethismographic signals in analogue mode. It can transmit the signal "online" to the PC, or it can do so later. The latter option uses the saved numerical data of the discredited analogue signals with available reading frequency of 100, 250, 400 and 600 Hz. The strength of the signal is automatically amplified. The most important results are presented on its liquid crystal display, since it is capable of processing the signals from the two channels and return some base results data. In essence the DT-HW1 is an 16- bit computer.

The optical differentiation between the PC and the examined patient allows for the US & EU requirement for electro-safety level (EU product).

The Dantest hardware is powered by four 1.5A batteries.

DT-HW5 is an extended version of DT-HW1 with a much improved user interface, increased features and possibilities, larger memory, and an opportunity for data transfer from the hardware to the PC through USB and IR ports.

DT-HW5  (double-channel) – registers and records from ECG and plethismographic signals in analogue mode. It can transmit the signal "online" to the PC, or it can do so later. The latter option uses the saved numerical data of the discredited analogue signals with available reading frequency of 100, 250, 400 and 600 Hz. The strength of the signal is automatically amplified. The most important results are presented on its liquid crystal display, since it is capable of processing the signals from the two channels and return some results data. In essence the DT-HW5 is an 32- bit computer.

The optical differentiation between the PC and the examined patient allows for the US & EU requirement for electro-safety level (EU product).

For detailed instructions on DT-HW 5, please refer to “WORKING WITH DANTEST HARDWARE” section.

DT-HW6 is an Lite Version of DT-HW5 and it can work only connected with PC. Data transfer from the hardware to the PC is through USB

DT-HW6  (double-channel) – registers and records from ECG and plethismographic signals in analogue mode. The latter option uses the saved numerical data of the discredited analogue signals with available reading frequency of 100, 250, 400 and 600 Hz. The strength of the signal is automatically amplified.

The optical differentiation between the PC and the examined patient allows for the US & EU requirement for electro-safety level (EU product).